Examples

  • Praxis Dr. Stricker, Konstanz

    Praxis Dr. Stricker, Konstanz

  • Hybrid-OP, Universitätsklinik Ulm, Ulm

    Hybrid-OP, Universitätsklinik Ulm, Ulm

BARiT Clean Room Floors

Jointless and non-porous floor coatings offer hygienic and microbacterial security. For more than twenty years, BARiT has been developing floor coatings to meet with the very requirements of pharmaceutical industries and clean-room technologies.
Hyprid-OP, Universitätsklinik Ulm, Ulm
Hyprid-OP, Universitätsklinik Ulm, Ulm

The conductive BARiT-ATEX-COATING consist of two-components systems based on solvent-free epoxy and/or polyurethane resins packed with mineral fillers and inorganic pigments. Layers of 1.5 or 2 mm are to be applied.

Quick Info

  • conductive to DIN EN 1081 between 10⁴ and 10⁶Ω
  • jointless
  • in mat surface antiskid to BGR 181 R9
  • mechanical stability
  • chemical resistance
  • almost no abrasion
  • easy cleaning and disinfection

Optics

ATEX POWER and ATEX ELASTIC can be installed in a matte or glossy finish according to the BARiT colour chart. Specialized colours are available for areas over 500 m² on request.

RAL 9010
RAL 9010
pure white
RAL 7001
RAL 7001
silver grey
RAL 5024
RAL 5024
pastel blue

Properties

BARiT Flooring - Type: ATEX POWER, is a two-component system based on a solvent-free, epoxy resin, enriched with mineral fillers and inorganic pigments. Measured according to DIN EN 1081, the discharge resistance lies between 10⁴ and 10⁶Ω.

BARiT Flooring - Type: ATEX ELASTIC, is a flexible two-component system based on a solvent-free, polyurethane resin, enriched with mineral fillers and inorganic pigments. Measured according to DIN EN 1081, the discharge resistance lies between 10⁴ ind 10⁶Ω. The elasticity of the coating provides good dampening properties that also makes standing and walking on this surface extremely comfortable.
The use of high quality materials and a professional laying technology ensure that this electrically conductive coating is resistant against abrasions and chemicals.

ATEX POWER and ATEX ELASTIC are resistant to a variety of alkalis, diluted acids, salt solutions, mineral oils, as well as lubricants and fuels. The flooring's installed thickness is 1.5 - 2.5 mm. A matte finish allows for non-slipping movement.
The seamless surface ensures hygienic protection as well as a sterile environment. The dense surface is waterproof. The seamless and non-porous surface can be cleaned and disinfected efficiently and economically. Both coatings do not need to be initially treated.
For this purpose we offer BARiT Cleaner, which is specifically designed to clean and care for our products.

Type ATEX-COATING POWER/ELASTIC
Binding agent 2-K-EP-resin / 2-K-PUR-resin
Fillers inorganic/inert
Solid matters 99 %
Flash point > 110 °C / > 100 °C
Consumption/m² ca. 1,4 kg/mm / ca. 1,4 kg/mm
Grade of gloss gloss or mat with finish
Fire behaviour DIN EN 13501-1 Bfl-s1, hardly inflammable
Colour shade BARiT card of colours
Bending tensile strength DIN 1164** > 10 N/mm²
Compression strength DIN 1164** > 40 N/mm²
Resistance to earth DIN EN 1081 10⁴ – 10⁶ Ω
Adhesive pull strength DIN EN 24624 > 1,0 N/mm²
Light-fastness conditionally resisting to UV
Temperature resistance -20 °C to +70 °C
Chemical resistance to resistance list and self test
Working under conditions of:
  • air humidity
  • residual moisture of the ground
  • ground temperature min.
  • ground temperature max
 
  • < 75 % / < 80 %
  • < 3 %
  • 15 °C
  • 22 °C
Curing time at 20°C:
  • not sticky
  • walking admissible
  • final hardness
  • mechanical stability
 
  • after 6 hours
  • after 16 hours
  • after 7 days
  • after 7 days fully capable
Cleaning BARiT Cleaner*
** with prism method - according to AGI Worksheet A 80 and BEB Worksheets KH
* according to cleaning and care instructions