Examples

  • Delta Lloyd - SGL Carbon, Rheingau Palais

    Delta Lloyd - SGL Carbon, Rheingau Palais

BARiT Commercial Kitchens

BARiT coatings may be subjected to heavy mechanical strains to meet with the regulations of both food control and trade boards. BARiT coatings assure the very best working conditions because of their anti-skid effects which may be provided for the various projects between smooth and grip power with space of displacement.
SGL Carbon, Wiesbaden
SGL Carbon, Wiesbaden

Hygienic safety, good slip resistance and creative variety for the transformation of staff restaurants, free-flow and catering concepts.

 

The low panel thickness, seamless design and high load capacity speak for themselves in achieving a special atmosphere. Through its modest homogeneity, BARiT KITCHEN FLOOR blends harmoniously into sensitive colour concepts. The monochrome, single-color aesthetic emphasises modernity.

Quick Info

  • seamless
  • slip-proof according to BGR 181, R 11
  • mechanically and chemically resistant
  • pressure resistant
  • low abrasion
  • easy to clean and disinfect

Optics

The ideal starting point for aesthetic appearances, the application expertise that is the hallmark of BARiT, has always been greatly valued. The timeless design of the BARiT KITCHEN FLOOR is accented by the quality of the granules that give the satin finish a slightly metallic character.

BARiT KITCHEN FLOOR can be installed using diverse grades of granules and according to a selection of RAL colours. Pastel shades like pearl white, light ivory, light gray or platinum underline a high-quality, homogeneous look. Colored grains such as bright yellow, bright orange, bright green tones or traffic gray emphasize the diversity of available designs. Specialized granules are available based on RAL colours for areas over 200m².

RAL 9010
RAL 9010
pure white
RAL 7035
RAL 7035
light grey
RAL 7042
RAL 7042
traffic grey

Properties

BARiT KITCHEN FLOOR is made of water-clear, epoxy resin and polyurethane coated colourfast granules and is installed in a layer 8 - 10 mm thickness. It can be installed on top of calcium-sulfate based false and subflooring, cement as well as anhydrite flooring, and especially on heated flooring. This covering is installed without any joints or edges, eliminating any hazards for tripping. In addition, the seamless design provides hygienic protection.
BARiT KITCHEN FLOOR, due to its load-bearing capacity and resistance to high wear, is ideal for high traffic areas. The surface maintains very low abrasion when consistently exposed to chair castors. Due to its seamless surface, BARiT KITCHEN FLOOR is easy to clean and maintain.

Type KITCHEN FLOOR IN R11
Binding agent EP-resin
Fillers Granulates
Solid matters 100 %
Flash point > 100 °C
Consumption/m² 2 kg/mm
Grade of gloss silk gloss or mat
Grain BARiT card of grains
Fire behaviour DIN EN 13501-1 Bfl-s1, hardly inflammable
Bending tensile strength DIN 1164** > 10 N/mm²
Compression strength DIN 1164** > 40 N/mm²
Adhesive pull strength DIN EN 24624 > 2 N/mm²
Light-fastness conditionally resisting to UV
VOC Emission Meets the requirements of the AgBB
Anti-slip Class DIN 51130 R9, R11
Barefoot Suitability DIN 51097 B and C
Temperature resistance 100 °C temporarily, -30 °C to +70 °C consistently
Chemical resistance to resistance list and self test
Working under conditions of:
  • air humidity
  • residual moisture of the ground
  • ground temperature min.
  • ground temperature max.
 
  • 40 - 85%
  • < 3 %
  • 18 °C
  • 22 °C
Curing time at 20°C:
  • not sticky
  • walking admissible
  • final hardness
  • mechanical stability
 
  • after 12 hours
  • after 16 hours
  • after 7 days
  • after 7 days fully capable of bearing
Cleaning BARiT Cleaner*
** with prism method - according to AGI Worksheet A 81 and BEB Worksheets KH 5
* according to cleaning and care instructions