Examples

  • Möbel Rieger, Esslingen

    Möbel Rieger, Esslingen

BARiT Industrial Floors

The ever increasing cost call for some long-living floor coatings to low cost of maintenance and upkeep. BARiT industry floors may bear heavy loads. Being jointless, they are easy to clean. They are durable, cost-saving and ecologically beneficial.
Tiefgarage
Tiefgarage

For prevention of accidents in areas outside the kitchen; BARiT has developed the ANTISKID coating which consists of solvent-free epoxy resin and polyurethane resin serving as a protective coating. ANTISKID is packed with mineral fillers, inorganic pigments and integrated in aluminium oxide abrasive.

Quick Info

  • jointless
  • skid impending to BGR 181/ R11/ R12
  • mechanical stability
  • stability under chemical loads
  • almost no abrasion
  • resenting to compression and strong to impacts
  • easy cleaning

Optics

ANTISKID can be installed with a matte or satin gloss surface based on the colour chart. However, a coating must not always be natural and sober. Markers may be useful as indicators for escape routes or restricted zones.

Specialized colours are available for areas over 500m² on request.

RAL 7047
RAL 7047
telegrey
RAL 7001
RAL 7001
silver grey
RAL 7012
RAL 7012
basalt grey

Properties

BARiT COATING - Type: ANTISKID, is a two-component stem based on a solvent-free epoxy and polyurethane-based resin for the outer layer, enriched with mineral fillers, inorganic pigments and integrates fused aluminum oxide.

Due to the slip resistance factor of R 11/ R 12 as according to the accident prevention regulations of BGR 181, BARiT ANTISKID ensures a non-slip working space in outdoor areas.
The synthesis of both a professional laying technique and the structure of the coating provides a surface with low abrasion, which is equipped with good mechanical and chemical resistance. This coating is resistant to a variety of alkalis, diluted acids, salt solutions, mineral oils, as well as lubricants and fuels. The coating layer's installed thickness is 1.5 - 2.5 mm. For outdoor use the temperature limits for BARiT ANTISKID range between - 30 °C and + 70 °C.
It corresponds to OS 8 of the German Committee for Reinforced Concrete (DafStb) Regulations for the "Protection and repair of concrete structures".

Type ANTISKID
Binding agent 2-K-EP-resin
Fillers aluminium oxide abrasive, inorganic/inert
Solid matters 99 %
Flash point > 100 °C
Consumption/m² 2 kg/mm
Grade of gloss silk gloss or mat
Beding tensile strength DIN 1164** > 10 N/mm²
Colour shade anthracite or coloured layer to BARiT card of colours
Compression strength DIN 1164** > 40 N/mm²
Adhesive pull strength DIN EN 24624 > 1,0 N/mm²
Light-fastness conditionally resisting to UV
Temperature resistance -30 °C to +70 °C
Chemical resistance to resistance list and self test
Working under conditions of:
  • air humidity
  • residual moisture of the ground
  • ground temperature min.
  • ground temperature max.
 
  • 40 - 85%
  • < 3 %
  • 15 °C
  • 25 °C
Curing time at 20°C:
  • not sticky
  • walking admissible
  • final hardness
  • mechanical stability
 
  • after 12 hours
  • after 16 hours
  • after 7 days
  • after 7 days fully capable of bearing
Cleaning BARiT Cleaner*
** with prism method - according to AGI Worksheet A 80 and BEB Worksheets KH 4
* according to cleaning and care instructions