ANTISKID
For prevention of accidents in areas outside the kitchen; BARiT has developed the ANTISKID coating which consists of solvent-free epoxy resin and polyurethane resin serving as a protective coating. ANTISKID is packed with mineral fillers, inorganic pigments and integrated in aluminium oxide abrasive.
Quick Info
- jointless
- skid impending to BGR 181/ R11/ R12
- mechanical stability
- stability under chemical loads
- almost no abrasion
- resenting to compression and strong to impacts
- easy cleaning
Optic
ANTISKID can be installed with a matte or satin gloss surface based on the colour chart. However, a coating must not always be natural and sober. Markers may be useful as indicators for escape routes or restricted zones.
Specialized colours are available for areas over 500m² on request.
Samples
Properties
BARiT COATING - Type: ANTISKID, is a two-component stem based on a solvent-free epoxy and polyurethane-based resin for the outer layer, enriched with mineral fillers, inorganic pigments and integrates fused aluminum oxide.
Due to the slip resistance factor of R 11/ R 12 as according to the accident prevention regulations of BGR 181, BARiT ANTISKID ensures a non-slip working space in outdoor areas.
The synthesis of both a professional laying technique and the structure of the coating provides a surface with low abrasion, which is equipped with good mechanical and chemical resistance. This coating is resistant to a variety of alkalis, diluted acids, salt solutions, mineral oils, as well as lubricants and fuels. The coating layer's installed thickness is 1.5 - 2.5 mm. For outdoor use the temperature limits for BARiT ANTISKID range between - 30 °C and + 70 °C.
It corresponds to OS 8 of the German Committee for Reinforced Concrete (DafStb) Regulations for the "Protection and repair of concrete structures".
Datasheet
| Fillers | aluminium oxide abrasive, inorganic/inert |
| Solid matters | 99 % |
| Flash point | > 100 °C |
| Consumption/m² | 2 kg/mm |
| Grade of gloss | silk gloss or mat |
| Beding tensile strength DIN 1164** | > 10 N/mm² |
| Colour shade | anthracite or coloured layer to BARiT card of colours |
| Compression strength DIN 1164** | > 40 N/mm² |
| Adhesive pull strength DIN EN 24624 | > 1,0 N/mm² |
| Light-fastness | conditionally resisting to UV |
| Temperature resistance | -30 °C to +70 °C |
| Chemical resistance | to resistance list and self test |
Working under conditions of:
|
|
Curing time at 20°C:
|
|
| Cleaning | BARiT Cleaner* |
| Binding agent | 2-K-EP-resin |
Any questions regarding
our BARiT Industrial Floors?
Just call us or send us an email.
+49 711 939291-0 info@barit.deAs an alternative you can use our contact form to get in touch with us:
go to our contact form