In industrial buildings, floor coatings have to endure utmost mechanical loads. For this purpose, INDUSTRY TERRAZZO consists of aluminium oxide abrasive, high-quality water-white epoxy resin and granulates coated colour-fast with polyurethane resin packed mechanically in a layer of 8 —10 mm thickness.
- silent and vibration-free travelling
- antiskid to BGR 181 R9
- resisting all chemical and mechanical loads
- almost no abrasion
- easy cleaning and disinfection
The timeless look of the INDUSTRY-TERRAZZOS is determined by the quality of the granules. An installation in black/gray is not only aesthetically pleasing, but also insensitive to dirt.
The INDUSTRY-TERRAZZO consists of fused aluminum oxide, high-quality water-clear epoxy resin, and polyurethane coated colorfast granules, which is installed in a layer of 8-10 mm thick. An affordable option is the mechanical installation using natural or colored sands.
INDUSTRY-TERRAZZO provides for good chemical resistance. It is resistant against a variety of alkalis, diluted acids, salt solutions, mineral oils, as well as lubricants and fuels.
The structure of the INDUSTRY-TERRAZZO ensures high resistance to wear. With direct bonding to the underlying surface, it withstands both static and dynamic loading and unloading and maintains, even with forklift traffic, a low abrasion.
In addition, due to the seamless surface, transport equipment can move more silently and vibration-free. A matte finish allows a non-slipping movement.
For safety, INDUSTRY-TERRAZZO can be installed according to different non slipping classes according to BGR 181 from levels R 9 to R 12.
The seamless surface of INDUSTRY-TERRAZZO allows easy cleaning. For this purpose we offer BARiT Cleaner, which is specifically designed with its degreasing action to clean and care for our products.
The durability of the coating is based on the structure of the entire sub flooring.
To install INDUSTRY-TERRAZZO correctly, BARiT's service include the installation of the sub flooring as well as the drainage system.Datasheet
|Solid matters||100 %|
|Flash point||> 100 °C|
|Grade of gloss||silk gloss or mat|
|Grain||BARiT card of grains|
|Fire behavior DIN EN 13501-1||Bfl-s1, hardly inflammable|
|Bending tensile strenght DIN 1164**||> 10 N/mm²|
|Compression strength DIN 1164**||> 40 N/mm²|
|Adhesive pull strength DIN EN 24624||> 2 N/mm²|
|Light-fastness||conditionally resisting to UV|
|VOC Emission||meets the requirements of AgBB|
|Anti-slip Class DIN 51130||R9, R11, R12|
|Barefoot Suitability DIN 51097||B and C|
|Temperature resistance||100 °C temporarily / - 30 °C to + 70°C consistently|
|Chemical resistance||to resistance list and self test|
Working under conditions of:
Curing time at 20°C:
Any questions regarding
our BARiT Industrial Floors?
Just call us or send us an email.+49 711 939291-0 firstname.lastname@example.org
As an alternative you can use our contact form to get in touch with us:go to our contact form