Barit Industrial Floors

BARiT® Industrial Floors

Above all, an industrial floor must be able to withstand the highest loads - our jointless synthetic resin floor coatings are made for this.

HRL-COATING

High storage shelves require floor coatings of utmost plane levels. BARiT COATING Type HRL consists of a self-levelling 2-components system based on solvent-free epoxy resin packed with mineral fillers and inorganic pigments.

Marburger Tapetenfabrik GmbH + Co. KG, Kirchhain

Quick Info

  • jointless
  • most levelness precision
  • antiskid of mat surface to BGR 181 R9
  • mechanical / chemical resistance
  • almost no abrasion
  • resisting to compression and strong to impacts
  • Fire classification Cfl-s
  • easy cleaning

Optic

BARiT RESIN-COATING - Type: HRL, can be installed in a glossy or matte finish based on the BARiT color chart.

However, industrial flooring does not always have to look neutral and sober. Pavement markers may be useful as indicators for escape routes, restricted and/or loading zones.

Specialized colours are available for areas over 500m² on request.

Samples

RAL 9002
RAL 9002 , grey white
RAL 1002
RAL 1002 , telegrey
RAL 7012
RAL 7012 , basalt grey

Properties

BARiT RESIN-COATING - Type: HRL, is a two-component epoxy system based on a solvent and plasticizer free epoxy resin, enriched with mineral fillers and inorganic pigments. With self-leveling materials, surfaces with exacting accuracy can be installed in accordance with DIN 15185. The leveled flatness can be measured from 0.5 mm to 1 mm over a coverage distance of 1 m.

The structure of HRL industrial flooring and a proper laying technique ensure a coating with low abrasion, which is equipped with good mechanical and chemical resistance. Likewise, HRL industrial flooring is resistant to a variety of alkalis, diluted acids, salt solutions, mineral pils, as well as lubricants and fuels. The flooring's thickness of 2 - 4 mm gives HRL a strong mechanical stability.

For temperature exposure, this flooring can handle 120 °C temporarily, 40 °C consistently.

Datasheet
Fillers inorganic/inert
Solid matters 100 %
Flash point > 55 °C
Consumption/m² ca. 1,4 kg/mm
Grade of gloss glossy or mat
Colour shade BARiT card of colours
Bending tensile DIN 1164** > 10 N/mm²
Compression strength DIN 1164** > 40 N/mm²
Adhesive pull strength DIN EN 24624 > 1,0 N/mm²
Light-fastness with finish conditionally resisting to UV
Temperature resistance 70 °C consistently
Chemical resistance to resistance list and self test
Working under conditions of:
  • air humidity
  • residual moisture of the ground
  • ground temperature min.
  • ground temperature max.
  • 40 - 65 %
  • < 3 %
  • 18 °C
  • 25 °C
Curing time at 20°C:
  • not sticky
  • walking admissible
  • final hardness
  • mechanical stability
  • after 16 hours
  • after 2 days
  • after 7 days
  • after 7 days
Cleaning BARiT Cleaner*
Bindingt agent 2-K-EP-resin

Any questions regarding
our BARiT Industrial Floors?

Just call us or send us an email.

+49 711 939291-0

As an alternative you can use our contact form to get in touch with us:

go to our contact form

More Example Of Use

Selbstnivellierender Industrieboden (HRL Belag) in der Marburger Tapetenfabrik GmbH + Co. KG

Wall paper Factory Marburg GmbH + Co. KG / Sigloch Buchbinderei GmbH + Co. KG